Loading
Screws-8
Drill Point - Screw
Bugle - Phillips Head, Drill
Tek Point. Zinc Plated,
Hardened Steel, Fine Thread.
These screws are designed for attaching gypsum board, wood and insulation board to metal studs. Works great in piercing heavier steel up to 12 gauge. Also known as a “S-12” or just “Tek” Screw.
Length Shank Gauge Bulk Ctn. Gross Wgt. Appx. Count Per # 1# 15/Ctn 5# 6/Ctn 25#
Bulk Ctn.
Bulk Ctn.
1-1/4" 6 8M 34.1# 253 13142 15041 N/A 20525
1-5/8" 6 5M 24.9# 195 13144 15042 N/A 20527
1-7/8" 7 3M 17.0# 153 13143 15052 N/A 20528
2-3/8" 7 2.5M 19.0# 132 N/A 15046 N/A 20594
2-5/8" 8 2M 20.0# 100 13145 15053 N/A 20526
 

 

 
Laminating Screws
Sharp Point
Black Finish
Hardened Steel
This Bugle Head screw is used for attaching gypsum board to gypsum board.
Length Shank Gauge Bulk Ctn. Gross Wgt. Appx. Count Per # 1# 15/Ctn 5# 6/Ctn 25#
Bulk Ctn.
Bulk Ctn.
1-1/2" 10 5M 37.7# 133 13150 15045 N/A 20539
   
Pan Head
Drill/Tek Point
Zinc
Hardened Steel
These screws have a flat surface under the head esuring that they won’t pull through softer materials. Great for attaching fixtures, door frames, backup plates, etc. into 12 gauge studs. Also known as “S-12 Framing Screws” - “Zippys” or “Peanut Screws.”
Length Shank Gauge Bulk Ctn. Gross Wgt. Appx. Count Per # 1# 15/Ctn 5# 6/Ctn 25#
Bulk Ctn.
Bulk Ctn.
7/16" 6 15M 35.4 401 13119 15027 N/A 20529

 

Sharp Point
Black finish, Hardened Steel
Great for attaching stud to track in up to 20 gauge metal.
Length Shank Gauge Bulk Ctn. Gross Wgt. Appx. Count Per # 1# 15/Ctn 5# 6/Ctn 25#
Bulk Ctn.
Bulk Ctn.
7/16" 6 15M 35.4 401 13117 15025 N/A 20521

 

DWS-8

 

Back 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Next